Use this guide to enable 2-Factor Authentication access via RADIUS to CyberArk Password Vault Server.


1. Have CyberArk Password Vault Server

2. Configure and test CyberArk Password Vault Server with the PVWA

3. Create, sign, and install a certificate for the Vault Server

It is not recommended to use a self-signed certificate for RADIUS authentication

1. From the C:\Program Files (x86)\PrivateArk\Server location, run via command line the CACert utility with the request parameter

Example for Syntax: CACERT request /reqoutfile C:\Requests\VaultCert.req /country “US” /locality “Boston” /org “My Company” /orgunit “Management” /commonname “” /subjalt “IP:”

Note: The commonname parameter must specify the Vault’s DNS

2. Retrieve the request file (.req) and sign it with the Certificate Authority

3. Download the certificate file (.cer) and place it on the Vault Server

4. From C:\Program Files (x86)\PrivateArk\Server location, run via command line the CACert utility with the install parameter

Example for Syntax: CACERT install /CertFileName C:\certificates\certfile.cer (this is the location chosen during step 3)

4. Configure the OATH Provisioning Realm (SecureAuth998) in the SecureAuth IdP Web Admin for the RADIUS OTP authentication requests

5. Install and configure the SecureAuth RADIUS Server

CyberArk Configuration Steps


1. Log into the CyberArk Password Vault admin console, and select Options under Administration



2. Select RADIUS under Authentication Methods

3. Select Yes from the Enabled options to enable RADIUS

4. Click Apply

RADIUS Settings

5. To configure the RADIUS settings, stop the Password Vault Server

6. Generate the RADIUS shared secret file by opening the CMD as an administrator and running CAVaultManager to create an encrypted RADIUS shared secret file

Run this command: CAVaultManager SecureSecretFiles /SecretType Radius /Secret VaultSecret / SecuredFileName c:\RadiusSecret.dat

This is a sample of generating a shared secret file with test123 as the shared secret: C:\Program Files (x86)\PrivateArk\Server>CAVaultManager.exe SecureSecretFiles /SecretType Radius /Secret test123 /SecuredFileName C:\test.dat

Note that the RADIUS Secret has a 14 character limit

Ensure that the shared secret used for the CyberArk Configuration is the same as in the SecureAuth RADIUS Server settings

7. Locate the Password Vault Server DBParm.ini file at C:\Program Files (x86)\PrivateArk\Server, and take a backup of the file

8. Open the DBParm.ini file, and add the RadiusServerInfo key under the [MAIN] section:

CyberArk DBParm.ini Configuration Values
RADIUS_Server_IP = The IP of the RADIUS server
RADIUS_Port = Port number of the RADIUS 
vaulthostname = The name of the RADIUS client
radiusauth.dat = The shared secret file, created in the previous section

Example: RadiusServersInfo=;1812;SADept;BGRadius.dat

Replace the RadiusServersInfo, RADIUS_Server_IP, RADIUS_Port, vaulthostname, and radiusauth.dat placeholder values with the actual values

It is critical that the vaulthostname value is the exact same as seen in the RADIUS Client, e.g. ff the hostname is all lower case, then the RADIUS Client must identically reflect that

Ensure that there is an additional RADIUS Server for authentication (set up an additional RADIUS Server following step 8)

Example of two RADIUS Servers: RadiusServersInfo=;1812;SADept;BGRadius.dat,;1812;SADept;BGRadius.dat

9. Save the DBParm.ini file

10. Start the Password Vault Server

Error rendering macro 'excerpt-include'

User 'null' does not have permission to view the page.